CCTV TESTER
FEATURES :
1) Video test
8) Digital Multimeter (for the Fourth & the fifth CCTV Tester)
1) Video test
- 3.5' LCD screen, display the video signal and the quality of picture.
- Video signal system PAL/NTSC could be auto suitable
- The unit has the basic operation test on PTZ products, functions include pan/tilt, zoom in/out, preset setting and operation, auto scanning, speed adjustment etc : supportmulti-protocol and baud rate, communication viaa RS485 port.
- Protocol includee : Pelco D/P and so on.
- The CCTV Tester could supply power DC12B/1A to camera.
- Can test the audio device which connected the CCTV Camera.
- The wiring condition (disconnected, shirt circuit & sequemce of UTP cable) can be tested & display on the screen clearly
- Can test the RS485 data sent from control device, display the hexadecimal data content for engineering to analyze
- PTZ address scanning, search up the ID of PTZ camera.
8) Digital Multimeter (for the Fourth & the fifth CCTV Tester)
- Digital multimeter could test voltage, current, resistance & capacitance, continuity, diode and so on.
- There are 1625nm, 1550nm, 1490nm, 1310nm,1300nm & 850nm for option.
- It can display as linear & nonlinear,
- Not onlyt test the optical power meter, but also the loss measurement.
- Suitable for communication, cable television, & local network installation, debug and maintenance.
- The BNC connector can send and receive multiple signals (PAL,NTSC) barcode, there are 8 color : white, yellow, cyan, green, pink, red, blue and black.
- User can know whether the video channel transmit well/ has color deviation during the transmission by the color barcode.
- Can send color imange by the Video Output port and receive and show from the Video in Port, so it is suitable for Video transmission line site testing.